Molten metals simply slide off of the extra heavy duty coating of High-Temperature Silicone Rubber on all of these products (firesleeve), providing excellent burn-through protection.
SAE AS1072 Firesleeve with Metal Snap Closure
High Temperature, Heat, Flame, Fire & Pyro Resistant and Thermal Insulating
Severe Duty Molten Splash Protection Jacket Sleeve
High Temperature, Heat, Flame, Fire & Pyro Resistant and Thermal Insulating
Severe Duty Molten Splash Protection Jacket Sleeve
500°F / 260°C Continuous Exposure:
Higher Intermittent
SnapSleeveä high temperature, heat, flame, pyro and fire resistant sleeve and jacket provides molten splash & weld splatter protection to wires, cables, hoses, tubes and pipes. SnapSleeveä provides a field installable protection sleeve utilizing metal snaps instead of hook and loop closure strips.
Although sleeve with hook and loop closure provides excellent protection in most harsh environments, only SnapSleeve can endure the most demanding of liquid metal splash and heavy weld splatter. This sleeve also provides energy savings and personnel protection.
Snaps are typically installed at 4 or 6 inch spacing along the sleeve. Additional snaps may easily be field installed to allow for unique bends or extra closure protection.
Available in sizes from 1" through 12" ID. Other larger sizes available.
Higher Intermittent
SnapSleeveä high temperature, heat, flame, pyro and fire resistant sleeve and jacket provides molten splash & weld splatter protection to wires, cables, hoses, tubes and pipes. SnapSleeveä provides a field installable protection sleeve utilizing metal snaps instead of hook and loop closure strips.
Although sleeve with hook and loop closure provides excellent protection in most harsh environments, only SnapSleeve can endure the most demanding of liquid metal splash and heavy weld splatter. This sleeve also provides energy savings and personnel protection.
Snaps are typically installed at 4 or 6 inch spacing along the sleeve. Additional snaps may easily be field installed to allow for unique bends or extra closure protection.
Available in sizes from 1" through 12" ID. Other larger sizes available.
Sleeve Available in Red and Black
Withstands Molten Splash & Welding Splatter. Withstands 500°F / 260°C continuous exposure; 2200°F / 1205°C for periods up to 15 minutes and short flash excursions to 3000°F / 1650°C.
Part Number
S-FS-SNAP
S-FS-SNAP
02/18
Share this page.....
Click Image
To Open
Catalog Page
Catalog Page
SnapSleeveä Severe Duty Sleeve with metal snap closure