High Temperature Heat and Flame molten splash weld slag splatter spark Resistant Silica Fabrics

1800°F / 982°C Continuous Exposure: Higher Intermittent

InSilMax^ä extreme high temperature, heat and flame resistant fabric is used for equipment protection, welding curtains and blankets. Superior protection for weld splatter, slag and sparks.

Meets MIL-I-24244 and MIL-C-24576(SH) specifications. FM Approved Class 4950.

This fabric has a minimum 96% silicon dioxide content, providing optimal performance. Made from amorphous silica.

The fabric is available in the following finishes and weights:

InSilMaxä - 30:
                · Satin Weave.
                · 0.030" thick. 18oz/sq-yd
                · 36" and 60" wide roll width. Maximum 150 foot roll length.
                · Produced from an extremely pure silica base fiber (SiO₂) and can be
                    used at 1800F continuously with excursions to 3000F / 1650C.

InSilMaxä - 54:
                · Satin Weave.
                · 0.054" thick. 24oz/sq-yd
                · 36" and 60" wide roll width. Maximum 150 foot roll length.
                · Produced from an extremely pure silica base fiber (SiO₂) and can be
                    used at 1800F continuously with excursions to 3000F / 1650C.

InSilMaxä - 90:
                · Plain Weave.
                · 0.090" thick. 40oz/sq-yd
                · 40" and 60" roll width. Maximum 150 foot roll length.
                · Produced from an extremely pure silica base fiber (SiO₂) and can be
                    used at 1800F continuously with excursions to 3000F / 1650C.